| RKS.161.14.0544 SKF Slewing Ring Bearings | P90°:82.7 kN; PosiTrac Plus contact element:2 x B10724-44; R1:53.181 mm; Initial grease fill:87.885 g; H1:88.9 mm; RG:3/8 NPT; Mass pillow block:21.3 kg; H:174.625 mm; A1:88.9 mm; R2:21.431 mm; Appropriate attachment bolt size G:0.625 in; End plug (suffix Y):EPR 8; L:330.2 mm; P150°:44.5 kN; J max.:279.4 mm; Max. speed for PosiTrac Plus seal:2150 r/min; Cap bolt:2 x 5/8-11 UNC; H2:31.75 mm; |
| VLA201094-N INA Slewing Ring Bearings | Dynamic (Ca):25.1 kN; Static (Coa):26.1 kN; T:15.25 mm; d2:20 mm; Pu:3.180 kN; r2s (min):0.3 mm; a:11 mm; C:12 mm; r1s (min):1 mm; B:14 mm; D:47 mm; rs (min):1 mm; |
| VSI201094-N INA Slewing Ring Bearings | Calculation factor kr:0.21; D1 ≈:525 mm; db min.:468 mm; b:16.7 mm; r3,4 min.:4 mm; Da max.:564 mm; s max.:7.1 mm; Basic static load rating C0:5400 kN; B:160 mm; Design variant/feature:NNU/GWC2W33; K:9 mm; D:580 mm; Fatigue load limit Pu:475 kN; F:463 mm; r1,2 min.:4 mm; ra max.:3 mm; Basic dynamic load rating C:2330 kN; da max.:458 mm; rb max.:3 mm; Limiting speed:1100 r/min; |
| VLI200744-N INA Slewing Ring Bearings | Tolerance housing:H7; d:35 mm; Tolerance shaft:h8; Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.27 kg; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; Coefficient of friction µ max.:0.1; D:45 mm; B:70 mm; |
| RKS. 314310101001 SKF Slewing Ring Bearings | d1 ≈:790 mm; Basic dynamic load rating C:676 kN; ra max.:4 mm; d:600 mm; Reference speed:450 r/min; da min.:711 mm; Fatigue load limit Pu:69.5 kN; D1 ≈:610 mm; Da max.:689 mm; D:800 mm; Limiting speed:630 r/min; r1,2 min.:5 mm; Mass bearing (including seat washer where applicable):117 kg; H:90 mm; Basic static load rating C0:5000 kN; Minimum load factor A:120; |
| 16299001 Kaydon Slewing Ring Bearings | B4:9 mm; J6:201 mm; Rα:45 °; Fatigue load limit Pu:1.25 kN; N:27.5 mm; Mass bearing unit:3.6 kg; Basic dynamic load rating C:43.6 kN; Recommended tightening torque for grub screw:16.5 N·m; H:126 mm; J7:21 mm; s1:33.4 mm; N1:18 mm; Recommended diameter for attachment bolts, mm G:16 mm; Thread grub screw G2:3/8-24 UNF; N4:4 mm; Hexagonal key size for grub screw N:4.763 mm; H1:63.5 mm; L:219 mm; |
| VSU250955 INA Slewing Ring Bearings | Hydraulic nut:HMVC 36E; d:180 mm; Sleeve:S 136x6.1/2; G:179.476 mm; d1:165.1 mm; d3 max.:230.327 mm; B1:163.728 mm; B4:28.042 mm; Threads per inch:8; Mass adapter sleeve assembly:10 kg; B:28.042 mm; |
| RKS.222500101001 SKF Slewing Ring Bearings | Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:1600 rpm; D:420.0000 mm; d:300.000 mm; Grease Speed Rating Open/Shielded n1:1300 rpm; Fillet Radius ra:3.00 mm; Sealed Speed Rating n3:800 rpm; B:56.00 mm; Basic Static Radial Load Rating Co:375000 N; Basic Dynamic Radial Load Rating C:270000 N; |
| XSI140644-N INA Slewing Ring Bearings | d:70.000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3000 rpm; D:150.0000 mm; Accessories:One Shield & Snap-Ri; Basic Static Radial Load Rating Co:68000 N; Grease Speed Rating n1:4500 rpm; Oil Speed Rating n2:5300 rpm; Basic Dynamic Radial Load Rating C:104000 N; B:35.00 mm; Grease Speed Rating Open/Shielded n1:4500 rpm; Oil Speed Rating Open/Shielded n2:5300 rpm; |
| XSA140944-N INA Slewing Ring Bearings | D:180 mm; d:100 mm; Pu:290 kN; with tapered bore:2 400 min-1; Dynamic (Cr):4.5 mm; Static (Cor):8.3 mm; B:46 mm; rs (min):2.1 mm; with cylindrical bore:1 900 min-1; Oil:41.340 kN; Grease:375 kN; |
| RKS.302070202001 SKF Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:19000 rpm; D:35.0000 mm; Accessories:Without Accessories; Sealed Speed Rating n3:13000 rpm; d:17.000 mm; Basic Dynamic Radial Load Rating C:6050 N; B:10.00 mm; Oil Speed Rating Open/Shielded n2:24000 rpm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:3250 N; |
| 16379001 Kaydon Slewing Ring Bearings | Coefficient of friction µ min.:0.08; a:5 mm; Permissible sliding velocity v max.:0.5 m/s; B:100 mm; Mass bushing:1.7 kg; D:90 mm; Tolerance shaft:e7; h:76.5 mm; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v min.:0 m/s; α:124 °; Specific dynamic load factor K:25 N/mm²; Tolerance housing:H7; d:75 mm; Coefficient of friction µ max.:0.15; |