| RKS.210541 SKF Slewing Ring Bearings | F:26 mm; B:20 mm; d:22 mm; Mass inner ring:0.023 kg; r, r1,2 min.:0.3 mm; |
| VLA200744-N INA Slewing Ring Bearings | Pa:20.7 kN; Cap bolt recommended tightening torque:298.3 N·m; da:104.775 mm; P120°:94.3 kN; RG:1/2 NPT; A2:190.5 mm; Cap bolt:5/8-11 UNC; S:4.763 mm; h:46.831 mm; Eye bolt:2 x 3/8-16 UNC; Da:215.001 mm; PG:1/4 NPT; Cap bolt, SAE grade:8; Initial grease fill:379.89 g; P90°:149 kN; A1:120.65 mm; P180°:107 kN; H:257.175 mm; Stabilizing ring:SR-24-20; R2:30.163 mm; |
| 16356001 Kaydon Slewing Ring Bearings | d1 ≈:29 mm; M:2 mm; Specific static load factor K0:500 N/mm²; ra max.:0.3 mm; dk:35.5 mm; Specific dynamic load factor K:100 N/mm²; r1 min.:0.3 mm; b1:3.1 mm; Sealing solution:Triple-lip seals; α:4 °; Basic dynamic load rating C:48 kN; Design (sliding contact surface combination):Steel/steel, heavy-d; Da min.:36.9 mm; Da max.:39.2 mm; rb max.:0.6 mm; d:25 mm; C:16 mm; r2 min.:0.6 mm; |
| RKS. 111280101002 SKF Slewing Ring Bearings | F:30 mm; r, r1,2 min.:0.3 mm; B:26.5 mm; Mass inner ring:0.046 kg; d:25 mm; |
| 16384001 Kaydon Slewing Ring Bearings | Calculation factor f2C:1.05; Calculation factor f2D:1.09; ra max.:1.5 mm; d1:105.4 mm; Preload class D GD:2400 N; Static axial stiffness, preload class D:287 N/µm; Basic static load rating C0:76.5 kN; Number of balls z:20; Calculation factor f:1.14; da min.:97 mm; Calculation factor fHC:1; Calculation factor f2B:1.02; Static axial stiffness, preload class B:141 N/µm; rb max.:1 mm; Calculation factor f2A:1; |
| RKS.211091 SKF Slewing Ring Bearings | D:380 mm; b:11.1 mm; ra max.:2 mm; Calculation factor Y2:6.3; Da max.:369 mm; Basic static load rating C0:1760 kN; B2:38 mm; da max.:308 mm; Mass bearing + sleeve:40 kg; r1,2 min.:2.1 mm; Calculation factor Y0:4; db min.:290 mm; Calculation factor e:0.16; Fatigue load limit Pu:143 kN; Reference speed:1600 r/min; B:75 mm; B1:121 mm; D1 ≈:352 mm; d1:260 mm; Basic dynamic load rating C:1016 kN; |
| VSI200944-N INA Slewing Ring Bearings | Oil:38.410 kN; d:60 mm; rs (min):2.1 mm; Grease:315 kN; Static (Cor):5.5 mm; with cylindrical bore:2 800 min-1; B:46 mm; D:130 mm; Dynamic (Cr):3 mm; Pu:273 kN; with tapered bore:3 600 min-1; |
| VSU251055 INA Slewing Ring Bearings | Da:50.8 mm; N4:2 mm; DN:6.5 mm; s1:15.9 mm; Housing material:Cast iron; B:22.1 mm; Rα:45 °; RG:1/4-28 UNF; N:11.5 mm; Basic dynamic load rating C:9.56 kN; d:15.875 mm; Fatigue load limit Pu:0.2 kN; J6:61.5 mm; SWN:7 mm; H:98.5 mm; Recommended tightening torque for grub screw:4 N·m; T:32.9 mm; Mass bearing unit:0.33 kg; Hexagonal key size for grub screw N:2.381 mm; J:76.5 mm; |
| RKS.210741 SKF Slewing Ring Bearings | Accessories:Two Seals & Snap-Rin; Basic Dynamic Radial Load Rating C:134000 N; D:130.0000 mm; B:57.20 mm; Sealed Speed Rating n3:3400 rpm; Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:143000 N; Fillet Radius ra:2.00 mm; d:60.000 mm; Oil Speed Rating n2:4500 rpm; |
| VU25038 INA Slewing Ring Bearings | b:7 mm; G:M 60x2; d1:80 mm; d5:84 mm; Mass:0.5 kg; Associated spanner (Hook spanner in accordance with DIN 1810):HN 12-13; Recommended tightening torque:4.2 N·m; h:3 mm; B:26 mm; Grub (set) / Locking screw size:M 4; d3:85 mm; |
| RKS.062.20.0744 SKF Slewing Ring Bearings | N:6.7 mm; Minimum rotational disc speed min.:100 r/min; D:91 mm; Corrosion protection:Zinc-coated housing; Basic dynamic load rating C:20.8 kN; Recommended minimum temperature min.:-20 °C; D2:30 mm; J:75 mm; Minimum disc diameter min.:250 mm; Purpose/ Application:Seeding; Maximum rotational disc speed max.:350 r/min; Mass:0.46 kg; Maximum disc diameter max.:500 mm; Recommended lower temperature limit for storage (static):-50 °C; |
| VSI250955-N INA Slewing Ring Bearings | Da max.:279.5 mm; D:290 mm; Da min.:244.5 mm; b:15.5 mm; α:7 °; B:130 mm; r2 min.:1.1 mm; dk:250 mm; Material constant KM:330; Sealing solution:Triple-lip seals; ra max.:1 mm; da max.:213.5 mm; b1:15.5 mm; da min.:212.5 mm; Basic static load rating C0:10600 kN; M:7 mm; r1 min.:1.1 mm; Specific static load factor K0:500 N/mm²; Specific dynamic load factor K:100 N/mm²; d:200 mm; |